Rotary Microtome HM 355 S
MICROM International GmbH
Robert-Bosch-Str. 49
D- 69190 Walldorf
2-5-3 FINE FEED
After having adjusted specimen and knife as well
as having trimmed the specimen, sectioning can be
started. Press the control knob (fig. 4.3) to select
the section thickness setting.
Turn the handwheel continuously in one direction to
feed the specimen at the selected section
thickness.
The same process is carried out when the motor
drive for the cutting movement is turned on.
The handwheel on the right side of the instrument
rotates.
Commentaires sur ces manuels