Middle HM-27 Manuel d'instructions télécharger pdf (Page 49)

Rotary Microtome HM 355 S

MICROM International GmbH

Robert-Bosch-Str. 49

D- 69190 Walldorf

Installing the magnifier on the microtome

Please use the enclosed fastening elements to

attach the magnifier to the microtome. Remove the

front plastic caps from the upper side of the front

panel.

If there are no drilled holes in the front panel, it

must be replaced with a new one with drilled holes.

Fasten the peg (fig. 25.4) to the plate (fig. 25.6)

with the screw (fig. 25.7). Carefully introduce the

four sleeves (fig. 25.8) into the drilled holes with

the screws (fig. 25.5).

CAUTION! Please make sure that the sleeves

(fig. 25.8) do not fall into the interior of the

microtome.

CAUTION! Make sure the plate (fig. 25.6) is

mounted in a way that the peg (fig. 25.4) is closer

to the front of the microtome.

Put the plate (fig. 25.6) on the sleeves and fasten it

to the microtome with four screws (fig. 25.5).

A movable plastic socket that should be put on the

peg (fig. 25.4) is on the under side of the magnifier.

The magnifier can be adjusted forwards and

backwards for the most favorable viewing position.

If the large field magnifier is not used, slightly raise

it and turn it sideways on the peg.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 58 59

Pas de commentaire

Middle HM-27 Manuel d'instructions Page 49